Monday, November 21, 2016

Kelly Anorak

Closet Case Files
Kelly Anorak Jacket
Size 8
Fabric:  Twill

I made a jacket!  I'm so thrilled with how it turned out.  Initially I thought it might be beyond my skill level to make, but I decided to give it a try anyway.  I'm glad I did because I love everything about it!  It is very RTW looking.

It does take time to sew the Kelly up, especially if you make the flat fell seams.  It is worth it though because of the nice clean finish you have inside.  I didn't make my own bias tape.  I would have had to purchase more fabric, and at 3.5 yards to make it (45"), I was okay with purchasing a package.  Actually, I rather like the little bit of contrast at the hemline.

I hit a snag with the zipper installation.  I was following Closet Case files blog tutorial so closely that I did not realize that my zipper pull was located on the opposite side of their zipper pull.  Had I been paying attention, I would have realized that my first part of my zipper wasn't lining up against the edge before I sewed it.  Since I put in the zipper side that didn't have the pull, I put it in right side up (both sides kind of look the same if the pull isn't on it).  Unfortunately I didn't realize what I had done until I was ready to sew in the left side!  I really wanted to cry.  I thought I was done at that point, but I decided to unpick all my placket stitches and put it in the right way.  I'm so glad I did!  Anyway, I never knew that zipper pulls could vary from one side to the other, so I wanted to share that.

I love the length.  I didn't make any alteration to it.  I cut everything out on a size 8 and just sewed it up.

Look at these wonderful big pockets!  I think it would be fun to make smaller pockets at the top too should I make this again.  I imagine I will.  This is the first time I have worked with snaps.  Wawak has a snap kit which I highly recommend.  The tool that comes with it makes it pretty simple and I found a Prym video tutorial online.  I had a little trouble with the topside of the snap since it has to be lined up perfectly with the piece that goes on the underside of the fabric.  I managed to bend a few before I realized what I was doing wrong.  

I considered lining the jacket but decided it might make it too warm for me.  I want to be able to wear this a lot and I have other warm coats in my closet.  However, I did line the hood with black flannel.  I thought bringing in a little more black would look nice since my drawstring and zipper are both black.

Thanks for stopping by ~ Shirley

Sunday, October 30, 2016

Ottobre Lampi Jeggings with Jalie Dolman

Jalie Dolman Top 3352
Size T
Alterations:  Added 7 inches to the length

Ottobre Lampi Jeggings 5/2014-13
Size 36

I love the Jalie Dolman top.  I have made it several times for me and my girls.  I love that it comes in multiple sizes to accommodate all of us.  As my girls grow, I just trace the next size.  The shirt is so easy to make and looks different depending on your fabric choice.  For this tunic, I used a gray rayon knit from Joann's.  

I decided after making my jeggings that I wanted a tunic top to wear with them.  I wanted one that would fit me as good as the Jalie Dolman, so it occurred to me to just add some length.  Two hours later I had a new top.  Both sides of the fabric were not quite the same.  One side side was a little darker, which I used for the neck band.  To lengthen, I started at the pattern notch and gradually took my width out to 1/2" at the hemline.

I have wanted to make these jeggings ever since I received the 2014 Ottobre issue.  What was holding me back?  I could not find the right type of fabric I wanted to make them in.  Then one day while shopping, I came upon Telio Bailey Knit Black fabric.  It is medium/heavy weight and absolutely perfect for jeggings!

I used my cover stitch machine to do all top stitching, with the exception of the back pockets, coin pocket, and the single line of stitching on the outer side seam.  I wanted to be sure not to compromise any stretch the fabric would have.

I really like my outfit.  I have never owned a pair of jeggings until now.  One pair of jeggings will be sufficient for my needs, but I will definitely be adding many more Dolman tunics to my wardrobe.

Thanks for stopping by ~ Shirley

Thursday, October 20, 2016

Some Favorites Sewn Up Again

McCall's Top 7247
Ottobre Mini Skirt 5/2016

Top blogged previously here.
Skirt blogged previously here.

I did a couple of things differently this time.  I tacked the shirt down within the overlapped seam in a couple of places so the wind won't blow it open.

Also, last time I took 2 inches off the skirt length after I had made it.  This time I altered the pattern.  It does make a difference sometimes how you alter length.  If you take it off at the hem, you might alter dimensions width wise, especially with the way this skirt vents open.

This blouse fabric is the exact fabric on the McCall's pattern--how lucky is that!  I bought it not even knowing.  Then when I was going through my patterns to select a blouse, it occurred to me that I had that same fabric.  How could I not make it in this blouse!  Besides, I really love my first version of it.

This is definitely my kind of outfit.  It is so comfortable and perfect for fall and winter.  Warm enough to venture outside, but not so hot that you will bake indoors.

I made my slip not necklace too. I found a video online and was finished in minutes.


Here is another pair of jeans for my son, previously blogged here.  These are Ottobre's Hi-hat pants.  I have made these several times.

This time I left off all pocket flaps, used a different pocket for the backside from another pattern I made for my son, as well as adding an outer side pocket for his phone.

I used a lot of bar tacks for design.  The copper jeans top stitching thread looks fabulous with the dark brown denim.  The fabric is heavy weight, so rather stiff looking at the moment.  Until cooler weather, I will keep these jeans in the laundry room and wash with every load of jeans and towels in hopes to soften them up.

I made these in a 170, so they are a little big with this pattern.  But, this will ensure (hopefully) they will fit throughout winter.


Here is a skirt I made a few months ago.  This is Paprika's Jade skirt--Love!

It is fully lined and the front side has fabric folds making it a very stylish-looking skirt.  I will definitely be making more Jade skirts in other colors.

Thanks for stopping by ~ Shirley

Tuesday, October 4, 2016

Flannel/knit button-up & Ottobre Boy's Jeans

McCall's 7447
Men's Size Small

Ottobre Spring 1/2014
#37 Desert Denim Jeans
Size 170

It's been a while since I've sewn for my son.  He has nearly outgrown all of his clothes that I've made, so new shirts and  jeans are in the sewing que for him.  He is growing up fast!

I picked up this fun winter knit fabric--he loves all things penguin related.

I love how this pattern combines a flannel shirt with knit sleeves.  I found there to be a little too much ease in the cap of the sleeve, so I ran a basting stitch to help control the fabric while easing it in.

I lined the hood with the same knit I used for the sleeves, encasing the neck seam.  See my post here on how I did that.

As you can see, this shirt does not have a back yoke, so it is not very fitted.

Here are the Ottobre jeans.  I'm really happy with the fit.  I made these in a 170 for him, which is the largest pattern size offered in their magazine.  I can't believe he is sizing out of Ottobre now.  The only change I made was to redraft the fly.  I prefer to follow Jalie Jeans pattern instructions, so I added the necessary pattern extension to the Ottobre pants front fly area, making assembly for the zipper much easier on me.

You can see in the above picture how the back yoke is fairly wide, so the pockets sit low.  

I love the back pocket detail, which was included in the Ottobre pattern instructions.  The sky is the limit with how you can design a back pocket, but I usually lack in ideas here.  I appreciate that Ottobre had something unique outlined for that.  It's been a while since I have added rivets to jeans; I forgot how much fun that was to do!

Thanks for stopping by ~ Shirley 

Thursday, September 22, 2016

Ottobre Tunic, Mini Skirt, & Leggings

Ottobre 5/2016

#8, Drapefront Top, Size 38
#7, Mini skirt, Size 36
#9, Leggings, Size 36

This was such a fun and easy outfit to make.  All three patterns utilize very few pieces and sew up quickly.

I had to remove quite a bit of length in the tunic so it wouldn't be a dress on me.  But, yay me, I can also make this as a dress one day--ha!  I removed 4 inches on my tunic length, but after made, I had to remove an additional 2 inches.  It was too long, covering my not-so-mini skirt on me...something else I had to shorten after the fact.  I also found the sleeves to be rather long, so I cut 2 inches off there as well.  I did my normal 1/2 inch sway back adjustment.

I love how the CF, CB, and shoulder seams are sewn wrong sides together with a rolled hem. At the hemline, a rolled hem is also sewn.  I opted for black thread to tie into my skirt color, giving a nice contrast to my top too so those threads would really stand out.

I love the neckline on this.  When stabilizing the shoulder areas on the back pieces, make sure whatever you use doesn't exceed the width of your rolled hem.  I cut too wide a strip of interfacing and it was visible on the inside, so I had to work at peeling it off my fabric.

CB seam is a nice little detail.

Love, love, love these leggings.  You just wouldn't think that legging patterns would be so different from pattern to pattern.  These are the first that truly fit me well.  I had to shorten them by 3 inches.

Here you can see the front detail of the skirt a little better.  The skirt fronts overlap.  This is intended to be a mini and I forgot that mini patterns are usually down to my knees.  Normally this is great when I don't want a mini.  However, since I'm wearing leggings and flats, mini is a better look for me since my legs are kind of short.  My skirt material is a nice heavy weight knit.  Top of skirt is folded over, encasing elastic.

I'm sure that this is going to be one of my favorite outfits to wear this fall and winter!  

Thanks for stopping by ~ Shirley

Friday, September 16, 2016

Hooded Flannel Shirt with Jalie Jeans

McCall's 6613
Size S
Alterations:  Added a lined hood
Fabrics:  Flannel, jersey knit for hood lining

I love a good flannel shirt for winter.   I bought this flannel last year on clearance for about $3 a yard.  It is pretty thick too, making it a good weight for a jacket.

I'm happy I chose to use this shirt pattern.  The instructions were great and the fit is pretty good. The sleeves are a little long on me, but I'm okay with that.   If I use this pattern for a "shirt," I will most likely take some of the length out of the sleeve.   I used the hood pattern from McCall's 7447, which lined up perfectly.

I finally figured out how to line a hood enclosing the neck seam!  First, I basted my hood to the neck seam.  I left a large area of the hood lining center seam unsewn.  Next, I pinned the lining to the hood, right sides together, with the shirt folded up between the two.  I sewed all the way around the hood edges, pulling the shirt out through the hood lining opening.
 here are my hood pieces clipped right sides together with the shirt in the middle

 Then I pinned my center seam of my hood lining together and hand stitched it.

And I'm really happy that my stripes lined up!  I thought I cut out my pockets to line up too, but that didn't happen.  Oh well.  I just remind myself that with store bought, more times than not, their lines don't match either.

And what goes well with a comfy flannel but a nice new pair of Jalie jeans!

This is such a great pattern.  

Thanks for stopping by ~ Shirley

Saturday, August 27, 2016

Jalie Cocoon Cardigan

 I made myself a cardigan at last!  I made it previously for one of my girls here.

This is very easy to make and I sewed the entire cardigan on my serger.  The most time consuming part was attaching the band all the way around.  I used clips every couple of inches and they worked well to hold everything together.  I find I prefer using clips to pins.  My husband and kids no longer complain about getting stuck by a pin in my sewing area carpet.  I'm not the most careful seamstress with placing my pins back on the magnet dish.  

I imagine my sleeves could be shortened a little, but I'm okay with them being long.  I like a sleeve to come down over my hands actually.

I bought this knit at Joann's.  I fell in love with it immediately, but didn't buy it right away because it was super light weight and somewhat sheer.  Then I got to thinking how it would make the perfect cardigan--something to remember with those beautiful sheer knits that would otherwise not make a modest blouse.  When I returned to the store, they only had 1 and 5/8 yards on the bolt!  Thankfully, it was enough to make this cardigan in a size T for me.

I also made a plain white t-shirt to wear underneath it using Sewaholic's Renfrew pattern in a size 6.  I didn't want anything to compete with the busy print of my knit cardigan.  I also like wearing white shirts with jeans.  Most times I like just plain and simple.  

The t-shirt and cardigan took me about 3 hours total to make.  A small investment of time to have something new to wear with a pair of store bought jeans.

Thanks for stopping by ~ Shirley

Monday, August 22, 2016

My First Knitted Sweater

 I finished my sweater! 

This is what I made with's "My First Sweater" class.  I made a size small.  I already knew how to do the knit and purl stitch, but that is all.  I never made anything beyond a scarf.  Casting on stitches still gives me great difficulty and I seem to have to do it several times before I am happy with the results.  If you are a beginner like me, you can definitely knit this sweater.  I thought the video lessons were great and you could clearly see everything the instructor was doing.  Once I posted a question for help late at night and I had my answer in the early morning!

I made a few mistakes.  Picking up stitches at the neck and front edges was a struggle for me.  I don't think I picked up as many stitches as I was supposed to, but it still turned out okay.  Somehow I missed putting in the top buttonhole too!  My plastic markers (is that what you call them?) kept falling out.  I need the ones that look like safety pins.  Mine are shaped like broken circles, so when I would shift my project, out they fell.

The pattern instructions are for a smaller neck band, but I wanted to extend mine out so it would fold over onto itself.  As you can see, I didn't quite get there.  Next time I will be sure to add more rows.

I'm wearing my sweater with my Angel Bootcut Jeans.

I love the eyelet detail at the raglan edges.

I had a couple places on my button bands where there was some sort of opening but not the buttonhole.  I mended these with needle and yarn; they were small spots.  One spot looked like a stitch had come undone, but I'm not sure how that would have happened.  I definitely don't know how to fix anything yet, at least not the right way!  I'm happy though and it fits and it's warm--mission accomplished!  My next knitting project is to learn to make socks.

I made a new Jalie Dolman (3352) top.  I used a sheer, crinkled knit for the sleeves that I had left over from a few years ago.  I'm so glad I saved it because it was a perfect match.

One of the things I like about this style of top is it how it is a little longer in the back but not drastic like a high/low top.

Since I was working with the Dolman pattern, I decided to make one up for one of my girls.  The second one always goes together quicker since I don't have to refer to the instructions just having made it.

The last time I used this fabric, I made myself a maxi skirt.  The fabric is incredibly soft.

Thanks for stopping by ~ Shirley